Call us at 1300 108 625 | Email us at

General FAQS

We are based in Perth, Western Australia. All of our stock is already in Australia ready to ship. Our prices include shipping to anywhere in Australia.

On average, a well-made LED bathroom mirror can last up to 50,000 hours of operation, which is 5.7 years running 24 hours a day. If the mirror is used for about 3 hours per day, it could last approximately 18 to 45 years. It's important to note that LEDs are known for their energy efficiency and durability, making them a reliable choice for long-term use in bathroom mirrors.

To effectively clean your Invogue mirror and avoid corrosion, we recommend mixing a spray bottle with 95% water and 5% Isopropyl alcohol, spray onto a microfiber cloth and wipe the mirror, leaving no traces of moisture

Position the cable approximately at the mirrors center, considering the presence of studs and noggins. Each mirror has a cable that leaves the back of the mirror as identified on the drawings that includes sufficient length to reach in and around the mirrors central point where it can then be either junctioned or soldered.

Yes all our led bathroom mirrors carry an IP44 rating which indicates that the mirror is splash-resistant and can withstand water splashes from all directions.

To pair your Invogue Mirror with your devices Bluetooth settings, follow these steps:
1. Open the Bluetooth settings on your device.
2. Press the Bluetooth icon on your Invogue Mirror and wait for the confirmation tone.
3. When you hear the tone, locate the Invogue device (Invogue Mirrors) listed under Bluetooth settings and tap to establish a connection.
4. Once connected, you can select your preferred songs, podcasts, or audiobooks to enjoy. In optimal conditions, the Invogue Bluetooth connection can extend up to
approximately 10 meters.

Our mirrors and shaving cabinets are IP44 rated, allowing you the freedom to mount them at your preferred height above the basin.